Instal Observium Clien dengan Mudah

Hallo sahabat bloger, kali ini overseastwo akan menulisakan bagaimana mengistal Observium client pada linux melalui terminal dengan mudah. Pasti sudah pada tau tentang Obeservium, klo belum, kali ini overseastwo akan coba menjelaskan apa itu obeservium. Obeservium merupakan suatu tools untuk monitoring system, dengan kata lain, sebelum kita install obeservium client pertama terlebih dahulu kita install observium server. disini overseastwo tidak membahas bagaimana install observium server.  Ok langsung saja berikut simak script berikut.

#!/bin/bash
## Obserivum Client Setup Script
## v.0.5 - 12/15/13 - nunim@sonicboxes.com
## Tested on Debian 6/7 & Ubuntu 12.04+ - CentOS 5.8/6.4
## Useage: ./observium-client.sh <Community> <Contact Email>
## check if root
if [ $(whoami) != "root" ]; then
        echo "You need to run this script as root."
        echo "Use 'sudo ./observium-client.sh' then enter your password when prompted."
        exit 1
fi
## set community
COMMUNITY=$1
## set contact email
CONTACT=$2
## set hostname
#HOSTNAME=$(hostname -f)
## set distro
DISTRO=`cat /etc/*-release | grep -m 1 CentOS | awk {'print $1}'`
## check if community set
if [ -z "$COMMUNITY" ] ; then
echo "Community is not set"
echo "Please run the script again with ./observium-client.sh <Community> <Contact Email>"
exit
fi
## check if contact email is set
if [ -z "$CONTACT" ] ; then
echo "Contact Email is not set"
echo "Please run the script again with ./observium-client.sh <Community> <Contact Email>"
exit
fi
## set server location
read -p "Please enter where the server is physically located: " LOCATION
## check distro
if [ "$DISTRO" = "CentOS" ] ; then
    # clear yum cache
    yum clean all
    # install snmp daemon
    yum -y install net-snmp
    # set SNMP Daemon options
    sed -i.bak '/OPTIONS=/c\OPTIONS="-Lsd -Lf /dev/null -p /var/run/snmpd.pid"' /etc/sysconfig/snmpd
else
    # update package list
    apt-get update
    # install snmp daemon
    apt-get -y install snmpd
    # setup daemon options
    sed -i.bak "/SNMPDOPTS=/c\SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -p /var/run/snmpd.pid'" /etc/default/snmpd
fi
#setup /etc/snmp/snmpd.conf
cat > /etc/snmp/snmpd.conf <<END
com2sec readonly  default         $COMMUNITY
group MyROGroup v1         readonly
group MyROGroup v2c        readonly
group MyROGroup usm        readonly
view all    included  .1                               80
access MyROGroup ""      any       noauth    exact  all    none   none
syslocation $LOCATION
syscontact $CONTACT
#This line allows Observium to detect the host OS if the distro script is installed
extend .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro
END
#get distro checking script
wget -O distro http://www.sonicboxes.com/scripts/resources/observium_distro
mv distro /usr/bin/distro
chmod 755 /usr/bin/distro
#restart snmpd
/etc/init.d/snmpd restart
/bin/systemctl restart snmpd.service
#finished
clear
echo "#########################################################"
echo "##           !! !! Installation Complete !! !!         ##"
echo "#########################################################"
echo "#You may add this server to your Observium installation #"
echo "#          using $COMMUNITY as the Community            #"
echo "#########################################################"
echo "##         Install Script by Tarmizy Harsha       ##"
echo "#########################################################"
 

 Slamat mencoba. jika kurang jelas bisa meninggalkan komentar. 

Sekian

Share: